IfFrequency

SCPI Command :

OUTPut:IF:IFFRequency

class IfFrequencyCls

IfFrequency commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float

# SCPI: OUTPut:IF:IFFRequency
value: float = driver.applications.k18AmplifierEt.output.ifreq.ifFrequency.get()

Defines the frequency for the IF output of the FSW. The IF frequency of the signal is converted accordingly. Is available in the time domain and if the IF/VIDEO/DEMOD output is configured for IF. If the [IF WIDE OUTPUT] connector is used (TRACe:IQ:WBANd ON, see method RsFsw.Applications.K17_Mcgd.Trace.Iq.Wband.State.set) , this command is available as a query only. It returns the used IF output frequency which is defined automatically by the application according to the center frequency. For more information see ‘IF and video signal output’.

return

value: No help available

set(value: float) → None

# SCPI: OUTPut:IF:IFFRequency
driver.applications.k18AmplifierEt.output.ifreq.ifFrequency.set(value = 1.0)

Defines the frequency for the IF output of the FSW. The IF frequency of the signal is converted accordingly. Is available in the time domain and if the IF/VIDEO/DEMOD output is configured for IF. If the [IF WIDE OUTPUT] connector is used (TRACe:IQ:WBANd ON, see method RsFsw.Applications.K17_Mcgd.Trace.Iq.Wband.State.set) , this command is available as a query only. It returns the used IF output frequency which is defined automatically by the application according to the center frequency. For more information see ‘IF and video signal output’.

param value

Unit: HZ