Update

SCPI Command :

CONFigure:DPD:UPDate

Commands in total: 3

Subgroups: 2

Direct child commands: 1

set() → None

# CONFigure:DPD:UPDate
driver.applications.k18AmplifierEt.configure.dpd.update.set()

This command updates the DPD shaping tables on the R&S SMW when new measurement data is available. Prerequisites for this command

• Turn on polynomial DPD (method RsFsw.applications.k18AmplifierEt.configure.ddpd.state.set() ) .

set_with_opc(opc_timeout_ms: int = -1) → None

# CONFigure:DPD:UPDate
driver.applications.k18AmplifierEt.configure.dpd.update.set_with_opc()

This command updates the DPD shaping tables on the R&S SMW when new measurement data is available. Prerequisites for this command

• Turn on polynomial DPD (method RsFsw.applications.k18AmplifierEt.configure.ddpd.state.set() ) .

Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

Cloning the Group

# Create a copy of the original group, that exists independently
update_copy = driver.applications.k18AmplifierEt.configure.dpd.update.clone()

Subgroups

• All
• LedState