External<ExternalPort>

SCPI Command :

[SENSe]:SWEep:EGATe:LEVel[:EXTernal<tp>]

Commands in total: 1

Subgroups: 0

Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1 .. Nr3

driver.applications.k14Xnr5G.sense.sweep.egate.level.external.repcap_externalPort_set(repcap.ExternalPort.Nr1)

get(externalPort=ExternalPort.Default) → float

# [SENSe]:SWEep:EGATe:LEVel[:EXTernal<tp>]
value: float = driver.applications.k14Xnr5G.sense.sweep.egate.level.external.get(externalPort = repcap.ExternalPort.Default)

Defines the gate level for which the gate is open. Is only available for triggered gated measurements (method RsFsw.sense.sweep.egate.auto.set() MAN) .

Parameters:

externalPort – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘External’)

set(level: float, externalPort=ExternalPort.Default) → None

# [SENSe]:SWEep:EGATe:LEVel[:EXTernal<tp>]
driver.applications.k14Xnr5G.sense.sweep.egate.level.external.set(level = 1.0, externalPort = repcap.ExternalPort.Default)

Defines the gate level for which the gate is open. Is only available for triggered gated measurements (method RsFsw.sense.sweep.egate.auto.set() MAN) .

Parameters:

externalPort – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘External’)

Cloning the Group

# Create a copy of the original group, that exists independently
external_copy = driver.applications.k14Xnr5G.sense.sweep.egate.level.external.clone()