Mode

SCPI Command :

CONFigure[:NR5G]:UL[:CC<cc>]:RFUC:FZERo:MODE

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(carrierComponent=CarrierComponent.Default) → IqBandwidthModeNr5G[source]

# CONFigure[:NR5G]:UL[:CC<cc>]:RFUC:FZERo:MODE
value: enums.IqBandwidthModeNr5G = driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.fzero.mode.get(carrierComponent = repcap.CarrierComponent.Default)

Selects the frequency selection mode for RF upconversion. Prerequisites for this command

Turn on phase compensation (method RsFsw.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.state.set() ) .

Parameters:: carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)
Returns:: mode: CF Converts the signal to the center frequency. MANual Converts the signal to another frequency. You can define the frequency with method RsFsw.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.fzero.frequency.set() .

set(mode: IqBandwidthModeNr5G, carrierComponent=CarrierComponent.Default) → None[source]

# CONFigure[:NR5G]:UL[:CC<cc>]:RFUC:FZERo:MODE
driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.fzero.mode.set(mode = enums.IqBandwidthModeNr5G.CF, carrierComponent = repcap.CarrierComponent.Default)

Selects the frequency selection mode for RF upconversion. Prerequisites for this command

Turn on phase compensation (method RsFsw.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.state.set() ) .

Parameters:

mode – CF Converts the signal to the center frequency. MANual Converts the signal to another frequency. You can define the frequency with method RsFsw.applications.k14Xnr5G.configure.nr5G.uplink.cc.rfuc.fzero.frequency.set() .
carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)