Ap<AntennaPort>

SCPI Command :

CONFigure[:NR5G]:UL[:CC<cc>]:PAMapping<cf>:PUSCh:AP<AntennaPort>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1 .. Nr12

driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.pamapping.pusch.ap.repcap_antennaPort_set(repcap.AntennaPort.Nr1)
get(carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort=AntennaPort.Default) → bool[source]
# CONFigure[:NR5G]:UL[:CC<cc>]:PAMapping<cf>:PUSCh:AP<AntennaPort>
value: bool = driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.pamapping.pusch.ap.get(carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort = repcap.AntennaPort.Default)

Selects the antenna port(s) that transmits the PUSCH. The selection indirectly also selects the antenna port that transmits the PUSCH DMRS.

Parameters:

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • antennaPortConfig – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

  • antennaPort – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ap’)

Returns:

state: ON | OFF | 1 | 0 Turns the transmission on a specific antenna port on and off. ALL Turns on the tranmission on all antenna ports (1000 to 1011) . NONE Turns off the transmission on all antenna ports. By default, the transmission is on antenna port 1000 (configuration 1) and 1001 (configuration 2) .

set(state: bool, carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort=AntennaPort.Default) → None[source]
# CONFigure[:NR5G]:UL[:CC<cc>]:PAMapping<cf>:PUSCh:AP<AntennaPort>
driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.pamapping.pusch.ap.set(state = False, carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort = repcap.AntennaPort.Default)

Selects the antenna port(s) that transmits the PUSCH. The selection indirectly also selects the antenna port that transmits the PUSCH DMRS.

Parameters:

  • state – ON | OFF | 1 | 0 Turns the transmission on a specific antenna port on and off. ALL Turns on the tranmission on all antenna ports (1000 to 1011) . NONE Turns off the transmission on all antenna ports. By default, the transmission is on antenna port 1000 (configuration 1) and 1001 (configuration 2) .

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • antennaPortConfig – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

  • antennaPort – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ap’)

Cloning the Group

# Create a copy of the original group, that exists independently
ap_copy = driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.pamapping.pusch.ap.clone()