Nports

SCPI Command :

CONFigure[:NR5G]:UL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SRS:NPORts

class NportsCls[source]

Nports commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(carrierComponent=CarrierComponent.Default, frame=Frame.Default, bwPart=BwPart.Default) → float[source]

# SCPI: CONFigure[:NR5G]:UL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SRS:NPORts
value: float = driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.frame.bwPart.srs.nports.get(carrierComponent = repcap.CarrierComponent.Default, frame = repcap.Frame.Default, bwPart = repcap.BwPart.Default)

Defines the number of antenna ports used by the sounding reference signal (1, 2 or 4) .

INTRO_CMD_HELP: Prerequisites for this command

Turn on SRS (method RsFsw.Applications.K14x_Nr5G.Configure.Nr5G.Uplink.Cc.Frame.BwPart.Srs.State.set) .

param carrierComponent: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)
param frame: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)
param bwPart: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘BwPart’)
return: ports: No help available

set(ports: float, carrierComponent=CarrierComponent.Default, frame=Frame.Default, bwPart=BwPart.Default) → None[source]

# SCPI: CONFigure[:NR5G]:UL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SRS:NPORts
driver.applications.k14Xnr5G.configure.nr5G.uplink.cc.frame.bwPart.srs.nports.set(ports = 1.0, carrierComponent = repcap.CarrierComponent.Default, frame = repcap.Frame.Default, bwPart = repcap.BwPart.Default)

Defines the number of antenna ports used by the sounding reference signal (1, 2 or 4) .

INTRO_CMD_HELP: Prerequisites for this command

Turn on SRS (method RsFsw.Applications.K14x_Nr5G.Configure.Nr5G.Uplink.Cc.Frame.BwPart.Srs.State.set) .

param ports: No help available
param carrierComponent: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)
param frame: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)
param bwPart: optional repeated capability selector. Default value: Nr1 (settable in the interface ‘BwPart’)