Ap<AntennaPort1k>

SCPI Command :

CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:PDSCh:AP<AntennaPort1k>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1000 .. Nr1011

driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.pdsch.ap.repcap_antennaPort1k_set(repcap.AntennaPort1k.Nr1000)
get(carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort1k=AntennaPort1k.Default) → bool[source]
# CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:PDSCh:AP<AntennaPort1k>
value: bool = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.pdsch.ap.get(carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort1k = repcap.AntennaPort1k.Default)

Selects the antenna port(s) on which the PDSCH is transmitted.

Parameters:

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • antennaPortConfig – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

  • antennaPort1k – optional repeated capability selector. Default value: Nr1000 (settable in the interface ‘Ap’)

Returns:

state: ON | OFF | 1 | 0 Turns the transmission on a specific antenna port on and off. ALL Turns on the tranmission on all antenna ports (1000 to 1011) . NONE Turns off the transmission on all antenna ports. By default, the transmission is on antenna port 1000 (configuration 1) and 1001 (configuration 2) .

set(state: bool, carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort1k=AntennaPort1k.Default) → None[source]
# CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:PDSCh:AP<AntennaPort1k>
driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.pdsch.ap.set(state = False, carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort1k = repcap.AntennaPort1k.Default)

Selects the antenna port(s) on which the PDSCH is transmitted.

Parameters:

  • state – ON | OFF | 1 | 0 Turns the transmission on a specific antenna port on and off. ALL Turns on the tranmission on all antenna ports (1000 to 1011) . NONE Turns off the transmission on all antenna ports. By default, the transmission is on antenna port 1000 (configuration 1) and 1001 (configuration 2) .

  • carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

  • antennaPortConfig – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

  • antennaPort1k – optional repeated capability selector. Default value: Nr1000 (settable in the interface ‘Ap’)

Cloning the Group

# Create a copy of the original group, that exists independently
ap_copy = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.pdsch.ap.clone()