Ap<AntennaPort3k>

RepCap Settings

# Range: Nr3000 .. Nr3031
rc = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.csirs.ap.repcap_antennaPort3k_get()
driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.csirs.ap.repcap_antennaPort3k_set(repcap.AntennaPort3k.Nr3000)

SCPI Command :

CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:CSIRs:AP<AntennaPort3k>

class ApCls

Ap commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: AntennaPort3k, default value after init: AntennaPort3k.Nr3000

get(carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort3k=AntennaPort3k.Default) → bool

# SCPI: CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:CSIRs:AP<AntennaPort3k>
value: bool = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.csirs.ap.get(carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort3k = repcap.AntennaPort3k.Default)

Selects the antenna port(s) on which the CSI reference signal is transmitted.

param carrierComponent

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

param antennaPortConfig

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

param antennaPort3k

optional repeated capability selector. Default value: Nr3000 (settable in the interface ‘Ap’)

return

state: ON | OFF | 1 | 0 Turns a specific CSI-RS antenna port on and off. ALL | NONE Turns all CSI-RS antenna port on and off.

set(state: bool, carrierComponent=CarrierComponent.Default, antennaPortConfig=AntennaPortConfig.Default, antennaPort3k=AntennaPort3k.Default) → None

# SCPI: CONFigure[:NR5G]:DL[:CC<cc>]:PAMapping<cf>:CSIRs:AP<AntennaPort3k>
driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.csirs.ap.set(state = False, carrierComponent = repcap.CarrierComponent.Default, antennaPortConfig = repcap.AntennaPortConfig.Default, antennaPort3k = repcap.AntennaPort3k.Default)

Selects the antenna port(s) on which the CSI reference signal is transmitted.

param state

ON | OFF | 1 | 0 Turns a specific CSI-RS antenna port on and off. ALL | NONE Turns all CSI-RS antenna port on and off.

param carrierComponent

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

param antennaPortConfig

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Pamapping’)

param antennaPort3k

optional repeated capability selector. Default value: Nr3000 (settable in the interface ‘Ap’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.pamapping.csirs.ap.clone()