Sspacing

SCPI Command :

CONFigure[:NR5G]:DL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SSPacing

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(carrierComponent=CarrierComponent.Default, frame=Frame.Default, bwPart=BwPart.Default) → SubcarrierSpacing[source]

# CONFigure[:NR5G]:DL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SSPacing
value: enums.SubcarrierSpacing = driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.frame.bwPart.sspacing.get(carrierComponent = repcap.CarrierComponent.Default, frame = repcap.Frame.Default, bwPart = repcap.BwPart.Default)

Selects the subcarrier spacing of a bandwidth part.

Parameters:

carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)
frame – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)
bwPart – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘BwPart’)

Returns:

subcarrier_spacing: SS15 15 kHz subcarrier spacing. Only for signal deployment in FR1. SS30 30 kHz subcarrier spacing. Only for signal deployment in FR1. SS60 60 kHz subcarrier spacing with normal cyclic prefix. For all signal deployments. SS120 120 kHz subcarrier spacing. Only for signal deployment in FR2. SS480 480 kHz subcarrier spacing. Only for signal deployment in FR2-2. SS960 960 kHz subcarrier spacing. Only for signal deployment in FR2-2 and a 2000 MHz bandwidth. X60 60 kHz subcarrier spacing with extended cyclic prefix. For all signal deployments. X120 120 kHz subcarrier spacing with extended cyclic prefix. Only for signal deployment in FR2.

set(subcarrier_spacing: SubcarrierSpacing, carrierComponent=CarrierComponent.Default, frame=Frame.Default, bwPart=BwPart.Default) → None[source]

# CONFigure[:NR5G]:DL[:CC<cc>]:FRAMe<fr>:BWPart<bwp>:SSPacing
driver.applications.k14Xnr5G.configure.nr5G.downlink.cc.frame.bwPart.sspacing.set(subcarrier_spacing = enums.SubcarrierSpacing.SS120, carrierComponent = repcap.CarrierComponent.Default, frame = repcap.Frame.Default, bwPart = repcap.BwPart.Default)

Selects the subcarrier spacing of a bandwidth part.

Parameters:

subcarrier_spacing – SS15 15 kHz subcarrier spacing. Only for signal deployment in FR1. SS30 30 kHz subcarrier spacing. Only for signal deployment in FR1. SS60 60 kHz subcarrier spacing with normal cyclic prefix. For all signal deployments. SS120 120 kHz subcarrier spacing. Only for signal deployment in FR2. SS480 480 kHz subcarrier spacing. Only for signal deployment in FR2-2. SS960 960 kHz subcarrier spacing. Only for signal deployment in FR2-2 and a 2000 MHz bandwidth. X60 60 kHz subcarrier spacing with extended cyclic prefix. For all signal deployments. X120 120 kHz subcarrier spacing with extended cyclic prefix. Only for signal deployment in FR2.
carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)
frame – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)
bwPart – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘BwPart’)