Port<MimoAntenna>

RepCap Settings

# Range: Nr1 .. Nr4
rc = driver.applications.k10Xlte.trigger.sequence.port.repcap_mimoAntenna_get()
driver.applications.k10Xlte.trigger.sequence.port.repcap_mimoAntenna_set(repcap.MimoAntenna.Nr1)

SCPI Command :

TRIGger[:SEQuence]:PORT<ant>

class PortCls

Port commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: MimoAntenna, default value after init: MimoAntenna.Nr1

get(mimoAntenna=MimoAntenna.Default) → RsFsw.enums.Port

# SCPI: TRIGger[:SEQuence]:PORT<ant>
value: enums.Port = driver.applications.k10Xlte.trigger.sequence.port.get(mimoAntenna = repcap.MimoAntenna.Default)

Selects the trigger port for measurements with devices that have several trigger ports.

param mimoAntenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Port’)

return

port: PORT1 PORT2 PORT3

set(port: RsFsw.enums.Port, mimoAntenna=MimoAntenna.Default) → None

# SCPI: TRIGger[:SEQuence]:PORT<ant>
driver.applications.k10Xlte.trigger.sequence.port.set(port = enums.Port.PORT1, mimoAntenna = repcap.MimoAntenna.Default)

Selects the trigger port for measurements with devices that have several trigger ports.

param port

PORT1 PORT2 PORT3

param mimoAntenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Port’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k10Xlte.trigger.sequence.port.clone()