Csi

SCPI Command :

CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CSI

class CsiCls

Csi commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(carrierComponent=CarrierComponent.Default) → RsFsw.enums.AntennaPortB

# SCPI: CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CSI
value: enums.AntennaPortB = driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.csi.get(carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

param carrierComponent

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

return

port: Antenna port used by the CSI reference signal. ALL Shows the results for all antenna ports. AP_15 | AP_16 | AP_17 | AP_18 | AP_19 | AP20 | AP21 | AP22 Shows the results for antenna port 15 to antenna port 22 only.

set(port: RsFsw.enums.AntennaPortB, carrierComponent=CarrierComponent.Default) → None

# SCPI: CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CSI
driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.csi.set(port = enums.AntennaPortB.ALL, carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

param port

Antenna port used by the CSI reference signal. ALL Shows the results for all antenna ports. AP_15 | AP_16 | AP_17 | AP_18 | AP_19 | AP20 | AP21 | AP22 Shows the results for antenna port 15 to antenna port 22 only.

param carrierComponent

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)