Uers

SCPI Command :

CONFigure[:LTE]:DL[:CC<cc>]:BF:AP[:UERS]

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(carrierComponent=CarrierComponent.Default) → AntennaPortA

# CONFigure[:LTE]:DL[:CC<cc>]:BF:AP[:UERS]
value: enums.AntennaPortA = driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.uers.get(carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

Parameters:

carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

Returns:

port: Antenna port used by the UE reference signal. ALL Shows the results for all antenna ports. AP_5_7 | AP_8 | AP_9 | AP_10 | AP_11 | AP_12 | AP_13 | AP_14 Shows the results for antenna port 5/7, 8, 9, 10, 11, 12, 13 or 14 only.

set(port: AntennaPortA, carrierComponent=CarrierComponent.Default) → None

# CONFigure[:LTE]:DL[:CC<cc>]:BF:AP[:UERS]
driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.uers.set(port = enums.AntennaPortA.ALL, carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

Parameters:

• port – Antenna port used by the UE reference signal. ALL Shows the results for all antenna ports. AP_5_7 | AP_8 | AP_9 | AP_10 | AP_11 | AP_12 | AP_13 | AP_14 Shows the results for antenna port 5/7, 8, 9, 10, 11, 12, 13 or 14 only.

• carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)