Cell

SCPI Command :

CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CELL

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(carrierComponent=CarrierComponent.Default) → AntennaPortC

# CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CELL
value: enums.AntennaPortC = driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.cell.get(carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

Parameters:

carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

Returns:

port: Antenna port used by the cell reference signal. ALL Shows the results for all antenna ports. AP_0 | AP_1 | AP_2 | AP_3 Shows the results for antenna port 0, 1, 2 or 3 only.

set(port: AntennaPortC, carrierComponent=CarrierComponent.Default) → None

# CONFigure[:LTE]:DL[:CC<cc>]:BF:AP:CELL
driver.applications.k10Xlte.configure.lte.downlink.cc.bf.ap.cell.set(port = enums.AntennaPortC.ALL, carrierComponent = repcap.CarrierComponent.Default)

Selects the antenna port for which beamforming measurement results are displayed. The availabilty of ports depends on the number of transmit antennas and number of beamforming layers.

Parameters:

• port – Antenna port used by the cell reference signal. ALL Shows the results for all antenna ports. AP_0 | AP_1 | AP_2 | AP_3 Shows the results for antenna port 0, 1, 2 or 3 only.

• carrierComponent – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)