from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from ....Internal import Conversions
from .... import enums
from .... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class SignalCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("signal", core, parent)
[docs]
def set(self, signal: enums.OutpConnGlbSignal, userIx=repcap.UserIx.Default) -> None:
"""
``OUTPut<HW>:USER<CH>:SIGNal`` \n
Snippet: ``driver.output.user.signal.set(signal = enums.OutpConnGlbSignal.BERCLKOUT, userIx = repcap.UserIx.Default)`` \n
Sets the control signal that is output at the selected connector. To define the connector direction, use the command
method ``RsSmw.output.user.direction.set()`` .
:param signal: MARKA1 | MARKA2 | MARKA3 | MARKB1 | MARKB2 | MARKB3 | MARKC1 | MARKC2 | MARKC3 | MARKD1 | MARKD2 | MARKD3 | SVALA | SVALB | OPULSA | OPULSB | SYNCA | VIDEOA | VIDEOB | SYNCB | NONE | RTRIGA | RTRIGB | SVALANegated | SVALBNegated | LOW | HIGH | MTRigger | SYNCOUT | BERRESTOUT | BERDATENOUT | BERCLKOUT | BERDATOUT MARKA | B|C | D1 | 2|3 = Baseband BB Marker 1/2/3 (available marker signals depend on the system configuration, see Table 'Mapping control signals to the USER x connectors') SVALA | SVALB = Signal Valid A/B, available for USER4 | 5|6 SVALANegated | SVALBNegated = Signal Valid A/B (negative) , available for USER4 | 5|6 OPULSA | OPULSB = Pulse Out A/B, available for USER4 | 5|6 SYNCA | SYNCB = Pulse Sync A/B, available for USER4 | 5|6 VIDEOA | VIDEOB = Pulse Video A/B, available for USER4 | 5|6 MTRigger = Manual Trigger, available for USER6 RTRIGA | RTRIGB = REG trigger A/B, available for USER4 | 5 BERRESTOUT | BERDATENOUT | BERCLKOUT | BERDATOUT = BERT TestGen Data, Clock, Data Enable and Restart SYNCOUT = Baseband Sync Out LOW | HIGH = Always 0/1 NONE = none
:param userIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'User')
"""
param = Conversions.enum_scalar_to_str(signal, enums.OutpConnGlbSignal)
userIx_cmd_val = self._cmd_group.get_repcap_cmd_value(userIx, repcap.UserIx)
self._core.io.write(f'OUTPut<HwInstance>:USER{userIx_cmd_val}:SIGNal {param}')
# noinspection PyTypeChecker
[docs]
def get(self, userIx=repcap.UserIx.Default) -> enums.OutpConnGlbSignal:
"""
``OUTPut<HW>:USER<CH>:SIGNal`` \n
Snippet: ``value: enums.OutpConnGlbSignal = driver.output.user.signal.get(userIx = repcap.UserIx.Default)`` \n
Sets the control signal that is output at the selected connector. To define the connector direction, use the command
method ``RsSmw.output.user.direction.set()`` .
:param userIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'User')
:return: signal: MARKA1 | MARKA2 | MARKA3 | MARKB1 | MARKB2 | MARKB3 | MARKC1 | MARKC2 | MARKC3 | MARKD1 | MARKD2 | MARKD3 | SVALA | SVALB | OPULSA | OPULSB | SYNCA | VIDEOA | VIDEOB | SYNCB | NONE | RTRIGA | RTRIGB | SVALANegated | SVALBNegated | LOW | HIGH | MTRigger | SYNCOUT | BERRESTOUT | BERDATENOUT | BERCLKOUT | BERDATOUT MARKA | B|C | D1 | 2|3 = Baseband BB Marker 1/2/3 (available marker signals depend on the system configuration, see Table 'Mapping control signals to the USER x connectors') SVALA | SVALB = Signal Valid A/B, available for USER4 | 5|6 SVALANegated | SVALBNegated = Signal Valid A/B (negative) , available for USER4 | 5|6 OPULSA | OPULSB = Pulse Out A/B, available for USER4 | 5|6 SYNCA | SYNCB = Pulse Sync A/B, available for USER4 | 5|6 VIDEOA | VIDEOB = Pulse Video A/B, available for USER4 | 5|6 MTRigger = Manual Trigger, available for USER6 RTRIGA | RTRIGB = REG trigger A/B, available for USER4 | 5 BERRESTOUT | BERDATENOUT | BERCLKOUT | BERDATOUT = BERT TestGen Data, Clock, Data Enable and Restart SYNCOUT = Baseband Sync Out LOW | HIGH = Always 0/1 NONE = none
"""
userIx_cmd_val = self._cmd_group.get_repcap_cmd_value(userIx, repcap.UserIx)
response = self._core.io.query_str(f'OUTPut<HwInstance>:USER{userIx_cmd_val}:SIGNal?')
return Conversions.str_to_scalar_enum(response, enums.OutpConnGlbSignal)