Level<NoisePoint>

RepCap Settings

# Range: Nr1 .. Nr5
rc = driver.source.noise.phasenoise.level.repcap_noisePoint_get()
driver.source.noise.phasenoise.level.repcap_noisePoint_set(repcap.NoisePoint.Nr1)

SCPI Command :

[SOURce<HW>]:NOISe:PHASenoise:LEVel<CH>

class LevelCls

Level commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: NoisePoint, default value after init: NoisePoint.Nr1

get(noisePoint=NoisePoint.Default) → float

# SCPI: [SOURce<HW>]:NOISe:PHASenoise:LEVel<CH>
value: float = driver.source.noise.phasenoise.level.get(noisePoint = repcap.NoisePoint.Default)

Sets the level value of the points, where the points are designated by the suffix <ch>.

param noisePoint

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)

return

phasenoise_level: float Range: -199.99 to 0

set(phasenoise_level: float, noisePoint=NoisePoint.Default) → None

# SCPI: [SOURce<HW>]:NOISe:PHASenoise:LEVel<CH>
driver.source.noise.phasenoise.level.set(phasenoise_level = 1.0, noisePoint = repcap.NoisePoint.Default)

Sets the level value of the points, where the points are designated by the suffix <ch>.

param phasenoise_level

float Range: -199.99 to 0

param noisePoint

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Level’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.noise.phasenoise.level.clone()