Vcc

SCPI Commands :

[SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MAX
[SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MIN
[SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:OFFSet

Commands in total: 5

Subgroups: 1

Direct child commands: 3

get_max() → float

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MAX
value: float = driver.source.iq.output.analog.envelope.vcc.get_max()

Sets the maximum value of the supply voltage Vcc.

Returns:

vcc_max: float Range: 0.04 to 8

get_min() → float

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MIN
value: float = driver.source.iq.output.analog.envelope.vcc.get_min()

Sets the maximum value of the supply voltage Vcc.

get_offset() → float

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:OFFSet
value: float = driver.source.iq.output.analog.envelope.vcc.get_offset()

Applies a voltage offset on the supply voltage Vcc.

Returns:

vcc_offset: float Range: 0 to 30, Unit: mV

set_max(vcc_max: float) → None

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MAX
driver.source.iq.output.analog.envelope.vcc.set_max(vcc_max = 1.0)

Sets the maximum value of the supply voltage Vcc.

Parameters:

vcc_max – float Range: 0.04 to 8

set_min(vcc_min: float) → None

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:MIN
driver.source.iq.output.analog.envelope.vcc.set_min(vcc_min = 1.0)

Sets the maximum value of the supply voltage Vcc.

Parameters:

vcc_min – float Range: 0.04 to 8

set_offset(vcc_offset: float) → None

# [SOURce<HW>]:IQ:OUTPut:[ANALog]:ENVelope:VCC:OFFSet
driver.source.iq.output.analog.envelope.vcc.set_offset(vcc_offset = 1.0)

Applies a voltage offset on the supply voltage Vcc.

Parameters:

vcc_offset – float Range: 0 to 30, Unit: mV

Cloning the Group

# Create a copy of the original group, that exists independently
vcc_copy = driver.source.iq.output.analog.envelope.vcc.clone()

Subgroups

• Value