Power

SCPI Commands :

[SOURce<HW>]:EFRontend:POWer:ATTenuation
[SOURce<HW>]:EFRontend:POWer:OFFSet

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_attenuation() → float[source]

# [SOURce<HW>]:EFRontend:POWer:ATTenuation
value: float = driver.source.efrontend.power.get_attenuation()

Requires [SOURce<hw>]:EFRontend:AMODe MANual. Sets the attenuation of the external frontend.

Returns:: attenuation: float Range: depends on connected device to depends on connected device

get_offset() → float[source]

# [SOURce<HW>]:EFRontend:POWer:OFFSet
value: float = driver.source.efrontend.power.get_offset()

Requires frontend R&S FE170ST or R&S FE110ST. Requires [SOURce<hw>]:EFRontend:AMODe AOFFset. Adds an offset value to the attenuation value provided from the external frontend.

Returns:: offset: float Range: depends on connected device to depends on connected device

set_attenuation(attenuation: float) → None[source]

# [SOURce<HW>]:EFRontend:POWer:ATTenuation
driver.source.efrontend.power.set_attenuation(attenuation = 1.0)

Requires [SOURce<hw>]:EFRontend:AMODe MANual. Sets the attenuation of the external frontend.

Parameters:: attenuation – float Range: depends on connected device to depends on connected device

set_offset(offset: float) → None[source]

# [SOURce<HW>]:EFRontend:POWer:OFFSet
driver.source.efrontend.power.set_offset(offset = 1.0)

Requires frontend R&S FE170ST or R&S FE110ST. Requires [SOURce<hw>]:EFRontend:AMODe AOFFset. Adds an offset value to the attenuation value provided from the external frontend.

Parameters:: offset – float Range: depends on connected device to depends on connected device