Moving

SCPI Commands :

[SOURce<HW>]:CEMulation:MDELay:MOVing:LOSS
[SOURce<HW>]:CEMulation:MDELay:MOVing:STATe
[SOURce<HW>]:CEMulation:MDELay:MOVing:VPERiod

class MovingCls

Moving commands group definition. 5 total commands, 1 Subgroups, 3 group commands

get_loss() → float

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:LOSS
value: float = driver.source.cemulation.mdelay.moving.get_loss()

No command help available

return:

loss: No help available

get_state() → bool

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:STATe
value: bool = driver.source.cemulation.mdelay.moving.get_state()

No command help available

return:

state: No help available

get_vperiod() → float

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:VPERiod
value: float = driver.source.cemulation.mdelay.moving.get_vperiod()

No command help available

return:

vperiod: No help available

set_loss(loss: float) → None

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:LOSS
driver.source.cemulation.mdelay.moving.set_loss(loss = 1.0)

No command help available

param loss:

No help available

set_state(state: bool) → None

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:STATe
driver.source.cemulation.mdelay.moving.set_state(state = False)

No command help available

param state:

No help available

set_vperiod(vperiod: float) → None

# SCPI: [SOURce<HW>]:CEMulation:MDELay:MOVing:VPERiod
driver.source.cemulation.mdelay.moving.set_vperiod(vperiod = 1.0)

No command help available

param vperiod:

No help available

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.cemulation.mdelay.moving.clone()

Subgroups

• Delay