Power
SCPI Commands :
[SOURce<HW>]:BBIN:POWer:CFACtor
[SOURce<HW>]:BBIN:POWer:PEAK
[SOURce<HW>]:BBIN:POWer:RMS
- Commands in total: 3Subgroups: 0Direct child commands: 3
- get_cfactor() float[source]
# [SOURce<HW>]:BBIN:POWer:CFACtor value: float = driver.source.bbin.power.get_cfactor()
Sets the crest factor of the external baseband signal.
- Returns:
cfactor: float Range: 0 to 30, Unit: dB
- get_peak() float[source]
# [SOURce<HW>]:BBIN:POWer:PEAK value: float = driver.source.bbin.power.get_peak()
Peak level of the external baseband signal relative to full scale of 0.5 V (in terms of dB full scale) .
- Returns:
peak: float Range: -60 to 3.02, Unit: dBfs
- get_rms() float[source]
# [SOURce<HW>]:BBIN:POWer:RMS value: float = driver.source.bbin.power.get_rms()
Queries the RMS level of the external digital baseband signal.
- Returns:
rms: float Range: -100 to 10
- set_cfactor(cfactor: float) None[source]
# [SOURce<HW>]:BBIN:POWer:CFACtor driver.source.bbin.power.set_cfactor(cfactor = 1.0)
Sets the crest factor of the external baseband signal.
- Parameters:
cfactor – float Range: 0 to 30, Unit: dB
- set_peak(peak: float) None[source]
# [SOURce<HW>]:BBIN:POWer:PEAK driver.source.bbin.power.set_peak(peak = 1.0)
Peak level of the external baseband signal relative to full scale of 0.5 V (in terms of dB full scale) .
- Parameters:
peak – float Range: -60 to 3.02, Unit: dBfs