Obaseband

SCPI Commands :

[SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:DELay
[SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:INHibit

Commands in total: 2

Subgroups: 0

Direct child commands: 2

get_delay() → float

# [SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:DELay
value: float = driver.source.bb.wlad.trigger.obaseband.get_delay()

Stops signal generation for trigger modes Armed_Auto and Armed_Retrigger. A subsequent internal or external trigger event restart signal generation.

Returns:

delay: float Range: 0 to 65535

get_inhibit() → int

# [SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:INHibit
value: int = driver.source.bb.wlad.trigger.obaseband.get_inhibit()

Specifies the number of samples by which a restart is to be inhibited following a trigger event. This command applies only for triggering by the second path.

Returns:

inhibit: integer Range: 0 to 67108863

set_delay(delay: float) → None

# [SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:DELay
driver.source.bb.wlad.trigger.obaseband.set_delay(delay = 1.0)

Stops signal generation for trigger modes Armed_Auto and Armed_Retrigger. A subsequent internal or external trigger event restart signal generation.

Parameters:

delay – float Range: 0 to 65535

set_inhibit(inhibit: int) → None

# [SOURce<HW>]:BB:WLAD:TRIGger:OBASeband:INHibit
driver.source.bb.wlad.trigger.obaseband.set_inhibit(inhibit = 1)

Specifies the number of samples by which a restart is to be inhibited following a trigger event. This command applies only for triggering by the second path.

Parameters:

inhibit – integer Range: 0 to 67108863