Coding

SCPI Commands :

[SOURce<HW>]:BB:WLAD:PCONfig:CODing:RATE
[SOURce<HW>]:BB:WLAD:PCONfig:CODing:TYPE

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_rate() → WlanadCodRate[source]

# [SOURce<HW>]:BB:WLAD:PCONfig:CODing:RATE
value: enums.WlanadCodRate = driver.source.bb.wlad.pconfig.coding.get_rate()

Sets the coding rate.

Returns:: rate: CR1D2 | CR3D4 | CR5D8 | CR13D14 | CR13D16 | CR13D21 | CR13D28 | CR52D63 | CR7D8 | CR2D3 | CR5D6

get_type_py() → WlanadChCod[source]

# [SOURce<HW>]:BB:WLAD:PCONfig:CODing:TYPE
value: enums.WlanadChCod = driver.source.bb.wlad.pconfig.coding.get_type_py()

Sets the channel coding type. You can set low-density parity-check (LDPC) coding only.

set_rate(rate: WlanadCodRate) → None[source]

# [SOURce<HW>]:BB:WLAD:PCONfig:CODing:RATE
driver.source.bb.wlad.pconfig.coding.set_rate(rate = enums.WlanadCodRate.CR13D14)

Sets the coding rate.

Parameters:: rate – CR1D2 | CR3D4 | CR5D8 | CR13D14 | CR13D16 | CR13D21 | CR13D28 | CR52D63 | CR7D8 | CR2D3 | CR5D6

set_type_py(type_py: WlanadChCod) → None[source]

# [SOURce<HW>]:BB:WLAD:PCONfig:CODing:TYPE
driver.source.bb.wlad.pconfig.coding.set_type_py(type_py = enums.WlanadChCod.LDPC)

Sets the channel coding type. You can set low-density parity-check (LDPC) coding only.