State

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation:[ENHanced]:CHANnel<CH0>:HSDPa:DERRor:BIT:STATe
class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default) bool[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:[ENHanced]:CHANnel<CH0>:HSDPa:DERRor:BIT:STATe
value: bool = driver.source.bb.w3Gpp.bstation.enhanced.channel.hsdpa.derror.bit.state.get(channelNull = repcap.ChannelNull.Default)

The command activates bit error generation or deactivates it. Bit errors are inserted into the data stream of the coupled HS-PDSCHs. It is possible to select the layer in which the errors are inserted (physical or transport layer) . When the data source is read out, individual bits are deliberately inverted at random points in the data bit stream at the specified error rate in order to simulate an invalid signal.

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return:

state: ON| OFF

set(state: bool, channelNull=ChannelNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:[ENHanced]:CHANnel<CH0>:HSDPa:DERRor:BIT:STATe
driver.source.bb.w3Gpp.bstation.enhanced.channel.hsdpa.derror.bit.state.set(state = False, channelNull = repcap.ChannelNull.Default)

The command activates bit error generation or deactivates it. Bit errors are inserted into the data stream of the coupled HS-PDSCHs. It is possible to select the layer in which the errors are inserted (physical or transport layer) . When the data source is read out, individual bits are deliberately inverted at random points in the data bit stream at the specified error rate in order to simulate an invalid signal.

param state:

ON| OFF

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)