Amode

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:AMODe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:AMODe
value: bool = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.amode.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Activates/deactivates the advanced mode in which the H-Set is generated by the ARB. The parameter can be configured only for H-Sets 1 - 5. For H-Sets 6 to 12 and User, it is always enabled.

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

Returns:

amode: ON | OFF

set(amode: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:AMODe
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.amode.set(amode = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Activates/deactivates the advanced mode in which the H-Set is generated by the ARB. The parameter can be configured only for H-Sets 1 - 5. For H-Sets 6 to 12 and User, it is always enabled.

Parameters:

  • amode – ON | OFF

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)