State

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]
value: bool = driver.source.bb.w3Gpp.bstation.channel.hsdpa.bmode.state.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates/deactivates burst mode. The signal is bursted when on, otherwise dummy data are sent during transmission brakes.

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

Returns:

state: ON | OFF

set(state: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]
driver.source.bb.w3Gpp.bstation.channel.hsdpa.bmode.state.set(state = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates/deactivates burst mode. The signal is bursted when on, otherwise dummy data are sent during transmission brakes.

Parameters:

  • state – ON | OFF

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)