Read

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:READ

class ReadCls[source]

Read commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → RsSmw.enums.TpcReadMode[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:READ
value: enums.TpcReadMode = driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.read.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets the read out mode for the bit pattern of the TPC field.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

read: CONTinuous| S0A| S1A| S01A| S10A CONTinuous The bit pattern is used cyclically. S0A The bit pattern is used once, then the TPC sequence continues with 0 bits. S1A The bit pattern is used once, then the TPC sequence continues with 1 bit. S01A The bit pattern is used once and then the TPC sequence is continued with 0 bits and 1 bit alternately (in multiples, depending on by the symbol rate, for example, 00001111) . S10A The bit pattern is used once and then the TPC sequence is continued with 1 bit and 0 bits alternately (in multiples, depending on by the symbol rate, for example, 11110000) .

set(read: RsSmw.enums.TpcReadMode, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:READ
driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.read.set(read = enums.TpcReadMode.CONTinuous, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets the read out mode for the bit pattern of the TPC field.

param read

CONTinuous| S0A| S1A| S01A| S10A CONTinuous The bit pattern is used cyclically. S0A The bit pattern is used once, then the TPC sequence continues with 0 bits. S1A The bit pattern is used once, then the TPC sequence continues with 1 bit. S01A The bit pattern is used once and then the TPC sequence is continued with 0 bits and 1 bit alternately (in multiples, depending on by the symbol rate, for example, 00001111) . S10A The bit pattern is used once and then the TPC sequence is continued with 1 bit and 0 bits alternately (in multiples, depending on by the symbol rate, for example, 11110000) .

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)