Misuse

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:MISuse
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:MISuse
value: bool = driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.misuse.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates ‘mis-’ use of the TPC field (Transmit Power Control) of the selected channel for controlling the channel powers of these channels of the specified base station. The bit pattern (see command method RsSmw.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.data.pattern.set() ) of the TPC field of each channel is used to control the channel power. A ‘1’ leads to an increase of channel powers, a ‘0’ to a reduction of channel powers. Channel power is limited to the range 0 dB to -60 dB. The step width of the change is defined with the method RsSmw.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.pstep.set() .

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

Returns:

misuse: ON | OFF

set(misuse: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None[source]
# [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:MISuse
driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.misuse.set(misuse = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates ‘mis-’ use of the TPC field (Transmit Power Control) of the selected channel for controlling the channel powers of these channels of the specified base station. The bit pattern (see command method RsSmw.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.data.pattern.set() ) of the TPC field of each channel is used to control the channel power. A ‘1’ leads to an increase of channel powers, a ‘0’ to a reduction of channel powers. Channel power is limited to the range 0 dB to -60 dB. The step width of the change is defined with the method RsSmw.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.pstep.set() .

Parameters:

  • misuse – ON | OFF

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • channelNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)