Plength

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:PLENgth
class PlengthCls[source]

Plength commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) PilLen[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:PLENgth
value: enums.PilLen = driver.source.bb.w3Gpp.bstation.channel.dpcch.plength.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the length of the pilot fields. The range of values for this parameter depends on the channel type and the symbol rate. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param baseStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return:

plength: BIT2| BIT4| BIT8| BIT16| BIT0

set(plength: PilLen, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:PLENgth
driver.source.bb.w3Gpp.bstation.channel.dpcch.plength.set(plength = enums.PilLen.BIT0, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the length of the pilot fields. The range of values for this parameter depends on the channel type and the symbol rate. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param plength:

BIT2| BIT4| BIT8| BIT16| BIT0

param baseStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)