Parameter

SCPI Commands :

[SOURce<HW>]:BB:TETRa:FILTer:PARameter:APCO25
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:GAUSs
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASSEVM
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASs
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:PGAuss
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:RCOSine
[SOURce<HW>]:BB:TETRa:FILTer:PARameter:SPHase

Commands in total: 9

Subgroups: 1

Direct child commands: 7

get_apco_25() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:APCO25
value: float = driver.source.bb.tetra.filterPy.parameter.get_apco_25()

Sets the filter parameter.

Returns:

apco_25: float Range: 0.05 to 0.99

get_gauss() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:GAUSs
value: float = driver.source.bb.tetra.filterPy.parameter.get_gauss()

Sets the filter parameter.

get_lpass() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASs
value: float = driver.source.bb.tetra.filterPy.parameter.get_lpass()

Sets the filter parameter.

get_lpass_evm() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASSEVM
value: float = driver.source.bb.tetra.filterPy.parameter.get_lpass_evm()

Sets the filter parameter.

get_pgauss() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:PGAuss
value: float = driver.source.bb.tetra.filterPy.parameter.get_pgauss()

Sets the filter parameter.

get_rcosine() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:RCOSine
value: float = driver.source.bb.tetra.filterPy.parameter.get_rcosine()

Sets the filter parameter.

get_sphase() → float

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:SPHase
value: float = driver.source.bb.tetra.filterPy.parameter.get_sphase()

Sets the filter parameter.

set_apco_25(apco_25: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:APCO25
driver.source.bb.tetra.filterPy.parameter.set_apco_25(apco_25 = 1.0)

Sets the filter parameter.

Parameters:

apco_25 – float Range: 0.05 to 0.99

set_gauss(gauss: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:GAUSs
driver.source.bb.tetra.filterPy.parameter.set_gauss(gauss = 1.0)

Sets the filter parameter.

Parameters:

gauss – float Range: 0.05 to 0.99

set_lpass(lpass: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASs
driver.source.bb.tetra.filterPy.parameter.set_lpass(lpass = 1.0)

Sets the filter parameter.

Parameters:

lpass – float Range: 0.05 to 0.99

set_lpass_evm(lpass_evm: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:LPASSEVM
driver.source.bb.tetra.filterPy.parameter.set_lpass_evm(lpass_evm = 1.0)

Sets the filter parameter.

Parameters:

lpass_evm – float Range: 0.05 to 0.99

set_pgauss(pgauss: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:PGAuss
driver.source.bb.tetra.filterPy.parameter.set_pgauss(pgauss = 1.0)

Sets the filter parameter.

Parameters:

pgauss – float Range: 0.05 to 0.99

set_rcosine(rcosine: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:RCOSine
driver.source.bb.tetra.filterPy.parameter.set_rcosine(rcosine = 1.0)

Sets the filter parameter.

Parameters:

rcosine – float Range: 0.05 to 0.99

set_sphase(sphase: float) → None

# [SOURce<HW>]:BB:TETRa:FILTer:PARameter:SPHase
driver.source.bb.tetra.filterPy.parameter.set_sphase(sphase = 1.0)

Sets the filter parameter.

Parameters:

sphase – float Range: 0.05 to 0.99

Cloning the Group

# Create a copy of the original group, that exists independently
parameter_copy = driver.source.bb.tetra.filterPy.parameter.clone()

Subgroups

• Cosine