Crate

SCPI Commands :

[SOURce<HW>]:BB:TDSCdma:CRATe:VARiation
[SOURce<HW>]:BB:TDSCdma:CRATe

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_value() → TdscdmaChipRate[source]

# [SOURce<HW>]:BB:TDSCdma:CRATe
value: enums.TdscdmaChipRate = driver.source.bb.tdscdma.crate.get_value()

Queries the system chip rate. The output chip rate which determines the rate of the spread symbols as is used for signal output can be set with the command SOUR:BB:TDSC:CRAT:VAR.

Returns:: crate: R1M28

get_variation() → float[source]

# [SOURce<HW>]:BB:TDSCdma:CRATe:VARiation
value: float = driver.source.bb.tdscdma.crate.get_variation()

Sets the output chip rate. The output chip rate changes the output clock and the modulation bandwidth, as well as the synchronization signals that are output. It does not affect the calculated chip sequence.

Returns:: variation: float Range: 400 to 5E6, Unit: Hz (c/s)

set_variation(variation: float) → None[source]

# [SOURce<HW>]:BB:TDSCdma:CRATe:VARiation
driver.source.bb.tdscdma.crate.set_variation(variation = 1.0)

Sets the output chip rate. The output chip rate changes the output clock and the modulation bandwidth, as well as the synchronization signals that are output. It does not affect the calculated chip sequence.

Parameters:: variation – float Range: 400 to 5E6, Unit: Hz (c/s)