State

SCPI Command :

[SOURce<HW>]:BB:ONEWeb:UL:UE<ST>:PRACh:SUBF<CH0>:STATe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → bool[source]
# [SOURce<HW>]:BB:ONEWeb:UL:UE<ST>:PRACh:SUBF<CH0>:STATe
value: bool = driver.source.bb.oneweb.uplink.ue.prach.subf.state.get(userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Enables/disables the PRACH for the selected subframe. The subframes available for configuration depend on the selected PRACH configuration.

Parameters:

  • userEquipment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

Returns:

state: 1 | ON | 0| OFF

set(state: bool, userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → None[source]
# [SOURce<HW>]:BB:ONEWeb:UL:UE<ST>:PRACh:SUBF<CH0>:STATe
driver.source.bb.oneweb.uplink.ue.prach.subf.state.set(state = False, userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Enables/disables the PRACH for the selected subframe. The subframes available for configuration depend on the selected PRACH configuration.

Parameters:

  • state – 1 | ON | 0| OFF

  • userEquipment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)