Bsame

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:DMTA:BSAMe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default) → bool[source]
# [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:PDSCh:DMTA:BSAMe
value: bool = driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.dmta.bsame.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default)

Per default, the same configuration applies for DMRS mapping type A and B. Disable ‘Same Settings for Type A and Type B’ to modify the mapping type B settings. Mapping type A and B define the DMRS position in the PDSCH, the starting symbol and length. The UE informs the BS about the mapping type supportability via the UE capability information message.

Parameters:

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

Returns:

same_dmre_setting: 1 | ON | 0| OFF