Mod

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:[CW<CW(S2US0)>]:MOD
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, codewordNull=CodewordNull.Default) → ModType[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:[CW<CW(S2US0)>]:MOD
value: enums.ModType = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cw.mod.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, codewordNull = repcap.CodewordNull.Default)

Sets the modulation scheme. For custom symbol constellations, the command selects the modulation order. The logic is the same as for standard modulations: QPSK corresponds to a constellation with modulation order = 4, 16QAM to modulation order = 16 etc.

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

  • codewordNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cw’)

Returns:

modulation: BPSK | BPSK2 | QPSK | QAM16 | QAM64 | QAM256 | QAM1024 | NSQAM4096 | NSQAM16384 Supported modulations depend on the channel.