ScSpacing

SCPI Command :

[SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:PRS:SCSPacing

class ScSpacingCls[source]

ScSpacing commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default) → NumerologyPrs[source]

# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:PRS:SCSPacing
value: enums.NumerologyPrs = driver.source.bb.nr5G.node.cell.prs.scSpacing.get(cellNull = repcap.CellNull.Default)

Sets the combination of the subcarrier spacing (SCS) and the cyclic prefix (CP) for the DL PRS frequency layer. Set the value according to the configured ‘Deployment’.

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

return:

prs_numerology: N15| N30| N60| N120| X60| N480| N960 N|X SCS N = Normal CP, X = Extended CP, SCS = SCS in kHz

set(prs_numerology: NumerologyPrs, cellNull=CellNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:PRS:SCSPacing
driver.source.bb.nr5G.node.cell.prs.scSpacing.set(prs_numerology = enums.NumerologyPrs.N120, cellNull = repcap.CellNull.Default)

Sets the combination of the subcarrier spacing (SCS) and the cyclic prefix (CP) for the DL PRS frequency layer. Set the value according to the configured ‘Deployment’.

param prs_numerology:

N15| N30| N60| N120| X60| N480| N960 N|X SCS N = Normal CP, X = Extended CP, SCS = SCS in kHz

param cellNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)