Inhibit

SCPI Command :

[SOURce<HW>]:BB:MCCW:TRIGger:[EXTernal<CH>]:INHibit

class InhibitCls

Inhibit commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(external=External.Default) → int

# SCPI: [SOURce<HW>]:BB:MCCW:TRIGger:[EXTernal<CH>]:INHibit
value: int = driver.source.bb.mccw.trigger.external.inhibit.get(external = repcap.External.Default)

Specifies the number of samples, by which a restart is inhibited following an external trigger event. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

param external:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘External’)

return:

inhibit: integer Range: 0 to 21.47 * (clock frequency) , Unit: sample E.g. 0 to 2147483647 samples (R&S SMW-B10)

set(inhibit: int, external=External.Default) → None

# SCPI: [SOURce<HW>]:BB:MCCW:TRIGger:[EXTernal<CH>]:INHibit
driver.source.bb.mccw.trigger.external.inhibit.set(inhibit = 1, external = repcap.External.Default)

Specifies the number of samples, by which a restart is inhibited following an external trigger event. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

param inhibit:

integer Range: 0 to 21.47 * (clock frequency) , Unit: sample E.g. 0 to 2147483647 samples (R&S SMW-B10)

param external:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘External’)