Satellite

SCPI Commands :

[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:AZIMuth
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CBIas
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CRANge
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:DSHift
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:ELEVation
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:FORMat
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:IDELay
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRANge
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBRate
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBias
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRRate
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RANGe
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RRATe
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:SLEVel
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STATe
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STEP
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:TDELay

class SatelliteCls[source]

Satellite commands group definition. 22 total commands, 4 Subgroups, 17 group commands

get_azimuth() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:AZIMuth
value: bool = driver.source.bb.gnss.logging.category.satellite.get_azimuth()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_cbias() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CBIas
value: bool = driver.source.bb.gnss.logging.category.satellite.get_cbias()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_crange() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CRANge
value: bool = driver.source.bb.gnss.logging.category.satellite.get_crange()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_dshift() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:DSHift
value: bool = driver.source.bb.gnss.logging.category.satellite.get_dshift()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_elevation() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:ELEVation
value: bool = driver.source.bb.gnss.logging.category.satellite.get_elevation()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_format_py() → RsSmw.enums.LogFmtSat[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:FORMat
value: enums.LogFmtSat = driver.source.bb.gnss.logging.category.satellite.get_format_py()

Sets the file format in that the logged data is saved.

return

format_py: CSV

get_idelay() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:IDELay
value: bool = driver.source.bb.gnss.logging.category.satellite.get_idelay()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_pr_bias() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBias
value: bool = driver.source.bb.gnss.logging.category.satellite.get_pr_bias()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_pr_rate() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRRate
value: bool = driver.source.bb.gnss.logging.category.satellite.get_pr_rate()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_prange() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRANge
value: bool = driver.source.bb.gnss.logging.category.satellite.get_prange()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_prb_rate() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBRate
value: bool = driver.source.bb.gnss.logging.category.satellite.get_prb_rate()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_range() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RANGe
value: bool = driver.source.bb.gnss.logging.category.satellite.get_range()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_rrate() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RRATe
value: bool = driver.source.bb.gnss.logging.category.satellite.get_rrate()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_slevel() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:SLEVel
value: bool = driver.source.bb.gnss.logging.category.satellite.get_slevel()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

get_state() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STATe
value: bool = driver.source.bb.gnss.logging.category.satellite.get_state()

Enables the logging of the selected category.

return

state: 1| ON| 0| OFF

get_step() → RsSmw.enums.LogRes[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STEP
value: enums.LogRes = driver.source.bb.gnss.logging.category.satellite.get_step()

Sets the logging step.

return

resolution: R1S| R2S| R5S| R10S| R02S| R04S| R08S

get_tdelay() → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:TDELay
value: bool = driver.source.bb.gnss.logging.category.satellite.get_tdelay()

Enables the parameter for logging.

return

state: 1| ON| 0| OFF

set_azimuth(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:AZIMuth
driver.source.bb.gnss.logging.category.satellite.set_azimuth(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_cbias(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CBIas
driver.source.bb.gnss.logging.category.satellite.set_cbias(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_crange(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:CRANge
driver.source.bb.gnss.logging.category.satellite.set_crange(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_dshift(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:DSHift
driver.source.bb.gnss.logging.category.satellite.set_dshift(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_elevation(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:ELEVation
driver.source.bb.gnss.logging.category.satellite.set_elevation(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_idelay(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:IDELay
driver.source.bb.gnss.logging.category.satellite.set_idelay(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_pr_bias(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBias
driver.source.bb.gnss.logging.category.satellite.set_pr_bias(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_pr_rate(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRRate
driver.source.bb.gnss.logging.category.satellite.set_pr_rate(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_prange(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRANge
driver.source.bb.gnss.logging.category.satellite.set_prange(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_prb_rate(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:PRBRate
driver.source.bb.gnss.logging.category.satellite.set_prb_rate(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_range(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RANGe
driver.source.bb.gnss.logging.category.satellite.set_range(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_rrate(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:RRATe
driver.source.bb.gnss.logging.category.satellite.set_rrate(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_slevel(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:SLEVel
driver.source.bb.gnss.logging.category.satellite.set_slevel(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

set_state(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STATe
driver.source.bb.gnss.logging.category.satellite.set_state(state = False)

Enables the logging of the selected category.

param state

1| ON| 0| OFF

set_step(resolution: RsSmw.enums.LogRes) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:STEP
driver.source.bb.gnss.logging.category.satellite.set_step(resolution = enums.LogRes.R02S)

Sets the logging step.

param resolution

R1S| R2S| R5S| R10S| R02S| R04S| R08S

set_tdelay(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:SATellite:TDELay
driver.source.bb.gnss.logging.category.satellite.set_tdelay(state = False)

Enables the parameter for logging.

param state

1| ON| 0| OFF

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.gnss.logging.category.satellite.clone()

Subgroups