NzqOffset

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → int[source]

# [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset
value: int = driver.source.bb.eutra.downlink.drs.cell.csirs.nzqOffset.get(cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the Q-offset.

Parameters:

cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)
csiRefSignal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)

Returns:

non_zero_pq_offs: -24| -22| -20| -18| -16| -14| -12| -10| -8| -6| -5| -4| -3| -2| -1 | 0| 1 | 2| 3 | 4| 5 | 6| 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 Positive values outside the permitted discrete values are rounded down; negative values are rounded up.

set(non_zero_pq_offs: int, cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → None[source]

# [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset
driver.source.bb.eutra.downlink.drs.cell.csirs.nzqOffset.set(non_zero_pq_offs = 1, cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the Q-offset.

Parameters:

non_zero_pq_offs – -24| -22| -20| -18| -16| -14| -12| -10| -8| -6| -5| -4| -3| -2| -1 | 0| 1 | 2| 3 | 4| 5 | 6| 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 Positive values outside the permitted discrete values are rounded down; negative values are rounded up.
cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)
csiRefSignal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)