NzConfig

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZConfig

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → NumbersE[source]

# [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZConfig
value: enums.NumbersE = driver.source.bb.eutra.downlink.drs.cell.csirs.nzConfig.get(cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the CSI-RS configuration.

Parameters:

cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)
csiRefSignal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)

Returns:

non_zero_pwr_conf: 0 | 1| 2 | 3| 4 | 5| 6 | 7| 8 | 9| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 Values outside the permitted discrete values are rounded down.

set(non_zero_pwr_conf: NumbersE, cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → None[source]

# [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZConfig
driver.source.bb.eutra.downlink.drs.cell.csirs.nzConfig.set(non_zero_pwr_conf = enums.NumbersE._0, cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the CSI-RS configuration.

Parameters:

non_zero_pwr_conf – 0 | 1| 2 | 3| 4 | 5| 6 | 7| 8 | 9| 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 Values outside the permitted discrete values are rounded down.
cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)
csiRefSignal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)