Clipping

SCPI Commands :

[SOURce<HW>]:BB:DVB:CLIPping:LEVel
[SOURce<HW>]:BB:DVB:CLIPping:MODE
[SOURce<HW>]:BB:DVB:CLIPping:STATe

class ClippingCls[source]

Clipping commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_level() → int[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:LEVel
value: int = driver.source.bb.dvb.clipping.get_level()

Sets the limit for level clipping. This value indicates at what point the signal is clipped.

return:

level: integer Value specified as a percentage, relative to the highest level. 100 PCT indicates that clipping does not take place. Range: 1 to 100

get_mode() → ClipMode[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:MODE
value: enums.ClipMode = driver.source.bb.dvb.clipping.get_mode()

Sets the method for level clipping.

return:

mode: VECTor| SCALar

get_state() → bool[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:STATe
value: bool = driver.source.bb.dvb.clipping.get_state()

Activates level clipping.

return:

state: 1| ON| 0| OFF

set_level(level: int) → None[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:LEVel
driver.source.bb.dvb.clipping.set_level(level = 1)

Sets the limit for level clipping. This value indicates at what point the signal is clipped.

param level:

integer Value specified as a percentage, relative to the highest level. 100 PCT indicates that clipping does not take place. Range: 1 to 100

set_mode(mode: ClipMode) → None[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:MODE
driver.source.bb.dvb.clipping.set_mode(mode = enums.ClipMode.SCALar)

Sets the method for level clipping.

param mode:

VECTor| SCALar

set_state(state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:DVB:CLIPping:STATe
driver.source.bb.dvb.clipping.set_state(state = False)

Activates level clipping.

param state:

1| ON| 0| OFF