Divider

SCPI Command :

[SOURce<HW>]:BB:DM:TRIGger:OUTPut<CH>:PULSe:DIVider

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get ( output=Output.Default ) → int

set ( divider: int, output=Output.Default ) → None

# [SOURce<HW>]:BB:DM:TRIGger:OUTPut<CH>:PULSe:DIVider
# get:
value: int = driver.source.bb.dm.trigger.output.pulse.divider.get(output = repcap.Output.Default)
# set:
driver.source.bb.dm.trigger.output.pulse.divider.set(divider = 1, output = repcap.Output.Default)

Sets the divider for pulse marker mode (PULSe) . If R&S SMW-B9 is installed, the minimum marker duration depends on the sample/symbol rate. See ‘Marker minimum duration’.

Parameters:

• divider – integer Range: 2 (R&S SMW-B10) / 2* (R&S SMW-B9) to 1024

• output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)