Tchannel

SCPI Commands :

[SOURce<HW>]:BB:C2K:PPARameter:TCHannel:COUNt
[SOURce<HW>]:BB:C2K:PPARameter:TCHannel:FLENgth
Commands in total: 6
Subgroups: 4
Direct child commands: 2
get_count() → int[source]
# [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:COUNt
value: int = driver.source.bb.c2K.pparameter.tchannel.get_count()

This command sets the number of activated traffic channels. The setting takes effect only after execution of command method RsSmw.source.bb.c2K.pparameter.execute.set() .

Returns:

count: integer Range: 0 to 8

get_flength() → Cdma2KpredFramLen[source]
# [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:FLENgth
value: enums.Cdma2KpredFramLen = driver.source.bb.c2K.pparameter.tchannel.get_flength()

The command activates/deactivates the fundamental channel. The set value is specific for the selected radio configuration. The setting takes effect only after execution of command method RsSmw.source.bb.c2K.pparameter.execute.set() . It is specific for the selected radio configuration. The frame length affects the data rates that are possible within a channel. Changing the frame length can lead to a change of data rate and this in turn can bring about a change of Walsh code.

Returns:

flength: 20 | 40 | 80

set_count(count: int) → None[source]
# [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:COUNt
driver.source.bb.c2K.pparameter.tchannel.set_count(count = 1)

This command sets the number of activated traffic channels. The setting takes effect only after execution of command method RsSmw.source.bb.c2K.pparameter.execute.set() .

Parameters:

count – integer Range: 0 to 8

set_flength(flength: Cdma2KpredFramLen) → None[source]
# [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:FLENgth
driver.source.bb.c2K.pparameter.tchannel.set_flength(flength = enums.Cdma2KpredFramLen._20)

The command activates/deactivates the fundamental channel. The set value is specific for the selected radio configuration. The setting takes effect only after execution of command method RsSmw.source.bb.c2K.pparameter.execute.set() . It is specific for the selected radio configuration. The frame length affects the data rates that are possible within a channel. Changing the frame length can lead to a change of data rate and this in turn can bring about a change of Walsh code.

Parameters:

flength – 20 | 40 | 80

Cloning the Group

# Create a copy of the original group, that exists independently
tchannel_copy = driver.source.bb.c2K.pparameter.tchannel.clone()

Subgroups