Pstep

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TPC:PSTep
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → float[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TPC:PSTep
value: float = driver.source.bb.c2K.bstation.cgroup.coffset.tpc.pstep.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command defines the step width for the change of channel powers in the case of ‘mis-’ use of the power control bits. Power control is available for sub channel types F-DCCH and F-FCH. F-DCCH is only generated for radio configurations 3, 4 and 5. For the traffic channels, this value is specific for the selected radio configuration.

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

  • offset – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

Returns:

pstep: float Range: -10 dB to 10 dB

set(pstep: float, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TPC:PSTep
driver.source.bb.c2K.bstation.cgroup.coffset.tpc.pstep.set(pstep = 1.0, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command defines the step width for the change of channel powers in the case of ‘mis-’ use of the power control bits. Power control is available for sub channel types F-DCCH and F-FCH. F-DCCH is only generated for radio configurations 3, 4 and 5. For the traffic channels, this value is specific for the selected radio configuration.

Parameters:

  • pstep – float Range: -10 dB to 10 dB

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

  • offset – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)