Divider

SCPI Command :

[SOURce<HW>]:BB:BTOoth:TRIGger:OUTPut<CH>:PULSe:DIVider

class DividerCls

Divider commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(output=Output.Default) → int

# SCPI: [SOURce<HW>]:BB:BTOoth:TRIGger:OUTPut<CH>:PULSe:DIVider
value: int = driver.source.bb.btooth.trigger.output.pulse.divider.get(output = repcap.Output.Default)

Sets the divider for the clock frequency. *) If R&S SMW-B9 is installed, the minimum marker duration depends on the sample/symbol rate. See ‘Marker Minimum Duration’.

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

return

divider: integer Range: 2 (R&S SMW-B10) / 2* (R&S SMW-B9) to 1024

set(divider: int, output=Output.Default) → None

# SCPI: [SOURce<HW>]:BB:BTOoth:TRIGger:OUTPut<CH>:PULSe:DIVider
driver.source.bb.btooth.trigger.output.pulse.divider.set(divider = 1, output = repcap.Output.Default)

Sets the divider for the clock frequency. *) If R&S SMW-B9 is installed, the minimum marker duration depends on the sample/symbol rate. See ‘Marker Minimum Duration’.

param divider

integer Range: 2 (R&S SMW-B10) / 2* (R&S SMW-B9) to 1024

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)