TpConfiguration

SCPI Commands :

[SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:TPINterval
[SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:UPLength
[SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:UPSource

Commands in total: 3
Subgroups: 0
Direct child commands: 3

get_tp_interval() → float[source]

# [SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:TPINterval
value: float = driver.source.bb.btooth.dtTest.tpConfiguration.get_tp_interval()

Sets the time interval between two consecutive test packets, regarding the starting points. Command sets the values in ms. Query returns values in s.

Returns:: tp_interval: float Range: 0.625E-3 s to 27.5E-3 s - depends on packet characteristics , Unit: ms

get_up_length() → int[source]

# [SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:UPLength
value: int = driver.source.bb.btooth.dtTest.tpConfiguration.get_up_length()

Sets the payload length.

Returns:: up_length: integer Range: 0 to 255

get_up_source() → BtoPyLdSour[source]

# [SOURce<HW>]:BB:BTOoth:DTTest:TPConfiguration:UPSource
value: enums.BtoPyLdSour = driver.source.bb.btooth.dtTest.tpConfiguration.get_up_source()

Selects the data source used for the payload test packets.

Returns:: up_source: PN09 | PAT1 | PAT2 | PN15 | PAT3 | PAT4 | PAT5 | PAT6 | DLIS PN9 | PN15 Pseudo random bit sequences (PRBS) with length in bits. The length can be 9 bits or 15 bits. PAT1 Predefined pattern: 11110000 PAT2 Predefined pattern: 10101010 PAT3 Predefined pattern: 11111111 PAT4 Predefined pattern: 00000000 PAT5 Predefined pattern: 00001111 PAT6 Predefined pattern: 01010101 DLISt Binary data from data lists as a data source. Set the data list file via the following command: method RsSmw.source.bb.btooth.econfiguration.pconfiguration.data.dselection()