Trigger:Sweep:Immediate#

SCPI Commands

TRIGger<HW>:[SWEep]:[IMMediate]

Direct SCPI Members

void Perform ( InputIxRepCap inputIx )#
void PerformAndWait ( InputIxRepCap inputIx )#
void PerformAndWait ( InputIxRepCap inputIx, int opcTimeoutMs )
// SCPI: TRIGger<HW>:[SWEep]:[IMMediate]
driver.Trigger.Sweep.Immediate.Perform(InputIxRepCap.Default);
driver.Trigger.Sweep.Immediate.PerformAndWait(InputIxRepCap.Default);
driver.Trigger.Sweep.Immediate.PerformAndWait(InputIxRepCap.Default, 1000);

Performs a single sweep and immediately starts the activated, corresponding sweep:

  • FSWeep - RF frequency

  • PSWeep - RF level

  • LFFSweep - LF frequency

  • SWEep - all sweeps

Effective in the following configuration:

  • TRIG:FSW | LFFS | PSW|[:SWE]:SOUR SING

  • SOUR:SWE:FREQ | POW:MODE AUTO or SOUR:LFO:SWE:[FREQ:]MODE AUTO

Alternatively, you can use the IMMediate command instead of the respective SWEep:[FREQ:]|POW:EXECute command.

inputIx Repeated capability selector

PerformAndWait is the same as Perform, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.