Source:Regenerator:Radar:Analyzer:Power:Apply#

SCPI Commands

[SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:APPLy

Direct SCPI Members

void Set ( )#
void SetAndWait ( )#
void SetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:APPLy
driver.Source.Regenerator.Radar.Analyzer.Power.Apply.Set();
driver.Source.Regenerator.Radar.Analyzer.Power.Apply.SetAndWait();
driver.Source.Regenerator.Radar.Analyzer.Power.Apply.SetAndWait(1000);

Sets the referenece level of the analyzer. The command can be used only if a R&S FSW is connected to the R&S SMW200A.

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.