Source:Regenerator:Radar:Analyzer:Power#

SCPI Commands

[SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:ATTenuator
[SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:REFerence

Cloning the Group

// Create a clone of the original group, that exists independently
var power2 = driver.Source.Regenerator.Radar.Analyzer.Power.Clone();

Direct SCPI Members

double Attenuator#
// SCPI: [SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:ATTenuator
double value = driver.Source.Regenerator.Radar.Analyzer.Power.Attenuator;
driver.Source.Regenerator.Radar.Analyzer.Power.Attenuator = 1.0;

Sets the attenuation of the external attenuator. The command can be used only if a R&S FSW is connected to the R&S SMW200A.

powerAttenuator: float


double Reference#
// SCPI: [SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:REFerence
double value = driver.Source.Regenerator.Radar.Analyzer.Power.Reference;

Queries the reference level of the analyzer. The command can be used only if a R&S FSW is connected to the R&S SMW200A.

powerReference: float


Subgroups