Source:Power:Spc:Measure#

SCPI Commands

[SOURce<HW>]:POWer:SPC:MEASure

Direct SCPI Members

void Set ( )#
void SetAndWait ( )#
void SetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:POWer:SPC:MEASure
driver.Source.Power.Spc.Measure.Set();
driver.Source.Power.Spc.Measure.SetAndWait();
driver.Source.Power.Spc.Measure.SetAndWait(1000);

Sets the measured power value as reference level.

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.