Source:Power:Attenuation:RfOff#

SCPI Commands

[SOURce<HW>]:POWer:ATTenuation:RFOFf:MODE

Direct SCPI Members

PowAttRfOffModeEnum Mode#
// SCPI: [SOURce<HW>]:POWer:ATTenuation:RFOFf:MODE
PowAttRfOffModeEnum value = driver.Source.Power.Attenuation.RfOff.Mode;
driver.Source.Power.Attenuation.RfOff.Mode = PowAttRfOffModeEnum.FATTenuation;

Selects the state the attenuator is to assume if the RF signal is switched off.

mode: UNCHanged | FATTenuation

  • FATTenuation: The step attenuator switches to maximum attenuation when RF is off.Note: This setting overrides the RF level modes :OUTPuthw:AMODeFIXed | MANual.

  • UNCHanged: Freezes the current setting to keep the output impedance constant during RF off.