Source:Iq:Output:Analog#

SCPI Commands

[SOURce<HW>]:IQ:OUTPut:ANALog:STATe
[SOURce<HW>]:IQ:OUTPut:[ANALog]:MODE
[SOURce<HW>]:IQ:OUTPut:[ANALog]:PRESet
[SOURce<HW>]:IQ:OUTPut:[ANALog]:TYPE

Cloning the Group

// Create a clone of the original group, that exists independently
var analog2 = driver.Source.Iq.Output.Analog.Clone();

Direct SCPI Members

bool State#
// SCPI: [SOURce<HW>]:IQ:OUTPut:ANALog:STATe
bool value = driver.Source.Iq.Output.Analog.State;
driver.Source.Iq.Output.Analog.State = false;

Activates the specified analog I/Q output. Note: By default, the output connectors I/Q Out x are deactivated.

state: 1 | ON | 0| OFF


IqOutModeEnum Mode#
// SCPI: [SOURce<HW>]:IQ:OUTPut:[ANALog]:MODE
IqOutModeEnum value = driver.Source.Iq.Output.Analog.Mode;
driver.Source.Iq.Output.Analog.Mode = IqOutModeEnum.FIXed;

Determines the mode for setting the output parameters.

mode: FIXed | VARiable

  • FIXed: Locks the I/Q output settings

  • VARiable: Unlocks the settings


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:IQ:OUTPut:[ANALog]:PRESet
driver.Source.Iq.Output.Analog.Preset();
driver.Source.Iq.Output.Analog.PresetAndWait();
driver.Source.Iq.Output.Analog.PresetAndWait(1000);

Sets the default settings (*RST values specified for the commands) . Not affected are:

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


IqOutTypeEnum Type#
// SCPI: [SOURce<HW>]:IQ:OUTPut:[ANALog]:TYPE
IqOutTypeEnum value = driver.Source.Iq.Output.Analog.Type;
driver.Source.Iq.Output.Analog.Type = IqOutTypeEnum.DAC;

Sets the type of the analog signal.


Subgroups