Source:Efrontend:Frequency:Band:Config#

SCPI Commands

[SOURce<HW>]:EFRontend:FREQuency:BAND:CONFig:MODE
[SOURce<HW>]:EFRontend:FREQuency:BAND:CONFig:SELect

Cloning the Group

// Create a clone of the original group, that exists independently
var config2 = driver.Source.Efrontend.Frequency.Band.Config.Clone();

Direct SCPI Members

AutoManualModeEnum Mode#
// SCPI: [SOURce<HW>]:EFRontend:FREQuency:BAND:CONFig:MODE
AutoManualModeEnum value = driver.Source.Efrontend.Frequency.Band.Config.Mode;
driver.Source.Efrontend.Frequency.Band.Config.Mode = AutoManualModeEnum.AUTO;

Sets the mode for frequency band configuration of the external frontend.

mode: AUTO | MANual

  • AUTO: Configures the frequency band automatically.R&S FE44S and R&S FE50DTR: For bandwidths ≤ 400 MHz, IF Low is used. For bandwidths larger than 400 MHz, IF High is used.R&S FE170ST or R&S FE110ST: Spur Optimized is used.

  • MANual: Uses the frequency band configured by [:SOURcehw]:EFRontend:FREQuency:BAND:CONFig:SELect.


string Select#
// SCPI: [SOURce<HW>]:EFRontend:FREQuency:BAND:CONFig:SELect
string value = driver.Source.Efrontend.Frequency.Band.Config.Select;
driver.Source.Efrontend.Frequency.Band.Config.Select = "abc";

Selects the frequency band configuration for the connected external frontend. Enter the mode as string, e.g. “IF Low”.

selBandConfig: string


Subgroups